Walk into any building material shop in Tamil Nadu and you will see many cement brands and at least three cement types. Owners often ask, "Which cement is the best?" The more useful question is, "Which cement is right for which part of my house?" This guide explains the types, grades and buying tips in plain language.
The main types of cement
OPC (Ordinary Portland Cement)
OPC is made mostly of clinker and gypsum. It gains strength quickly, so it is used where early strength matters, such as when you need to remove shuttering sooner. It comes in grades 43 and 53. The number refers to the strength (in MPa) the cement should reach after 28 days under standard testing.
PPC (Portland Pozzolana Cement)
PPC has fly ash or similar material blended in. It gains strength a little slower than OPC but keeps gaining over time, produces less heat during setting, and gives a denser, smoother finish. It is the most commonly used cement for houses in India.
PSC (Portland Slag Cement)
PSC contains blast furnace slag. It resists chemical attack better, which can be useful near the coast or in soils with salts. Availability in your area may vary.
Which cement for which job?
| Work | Commonly used | Note |
|---|---|---|
| Foundation, columns, beams, roof slab | PPC or OPC 43/53 | Follow your structural engineer's design |
| Brick or block masonry | PPC | Good workability |
| Plastering | PPC | Smoother, less shrinkage cracking when cured well |
| Flooring and tile bedding | PPC or OPC | Match the mix to the tile adhesive or mortar spec |
| Fast-track work | OPC 53 | Higher early strength, needs careful curing |
This table is general guidance. The grade of concrete (for example M20) and the cement type are chosen by your structural engineer. At Indian Builders our roof slabs are cast in RCC 1:2:4 (M20) concrete, 5 inches thick. Ask your own builder to name the cement used for each part of the work in the specification.
Is a costlier brand always better?
Not necessarily. Reputed brands are generally consistent in quality, and the grade matters more than the name. What does matter is that the cement you receive is genuine, fresh and stored correctly. A good brand stored badly in a damp room will perform worse than an average brand kept dry.
Price: what to expect
Cement is sold in 50 kg bags. Prices have moved within a few hundred rupees per bag in recent years and differ between brands, cement types, towns and seasons. Do not rely on a price you read in an article, including this one. Get current quotes from at least two dealers on the day you buy, and ask whether the price includes GST and delivery.
How to check cement quality at site
- Check the date. The bag shows the packing date. Cement loses strength with age. Use bags as fresh as possible, and avoid bags more than about three months old.
- Look for lumps. Lumps that do not break with light finger pressure indicate moisture damage.
- Check the bag print. The brand name, grade, type and ISI mark should be clear. Be careful of poorly printed or re-stitched bags.
- Feel and colour. Good cement is a uniform grey and feels smooth and cool.
- Count the delivery. Check bag count and weight against the bill.
Storing cement properly
- Stack bags on a raised wooden platform, away from walls and ground moisture.
- Cover with plastic sheets, and keep the store room dry.
- Stack no more than ten bags high and use the oldest stock first.
- Never leave bags open or in the rain.
Mixing and curing matter as much as the brand
Even the best cement gives weak concrete if the water ratio is too high or curing is poor. Watch for:
- Too much water added to make the mix easy to pour
- Sand that is dirty, silty or not graded properly
- Poor compaction, leaving honeycombs
- Insufficient curing; slabs and columns should be kept wet for the period your engineer specifies
See our guide on how to check construction quality at site for more.
Cement and the rest of the mix
Cement works with sand, aggregate and steel. Using clean M-sand or river sand and proper TMT steel is just as important. Our standard specification uses ISI steel and M-sand together with M20 concrete in the roof.
Questions to ask your builder
- Which cement type and grade will be used for slab, columns and plaster?
- Is the cement bought directly from the dealer in sealed bags?
- How will the site store and cure?
- Who checks quality: is there a dedicated site engineer?
Every Indian Builders project has a dedicated site engineer. To see how our packages and specification are laid out, visit the construction package page.
A simple buying routine
Buy cement in lots timed with the work, not months ahead. Ask the dealer for the packing date, count the bags as they are unloaded, and send bags to the store room immediately. Keep a small log of bags received and used. If the quantity used looks too high for the work done, ask questions early. This habit protects you whichever builder you choose.
Cement quantity: a rough idea
The exact quantity depends on the design and mix, and your engineer will estimate it from the drawings. As a rule of thumb, never accept a quantity much lower than the estimate, because it often means a weak mix, and never accept much higher consumption without a reason, because it can mean wastage. Ask your site engineer to compare the bags used against the volume of concrete and plaster completed at each stage.
Talk to Indian Builders about materials
Have questions about cement or any other material for your house? Call +91 95972 45305 or get a free quote and we will explain our specification clearly.